Piled Pontoons

Piled pontoons are designed with strength and durability in mind to give maximum security for large vessels berthed in all weather conditions. Piles can be made from steel, concrete, timber or composite materials to ensure a solid connection to the seabed.  Piles are sunk into the seabed with a piling barge, once the correct units have been selected.  Spun Concrete piles are durable and suitable in shallow waters with good soil conditions.  Once deeper water or rock is encountered, then the choice is better with steel.  Steel piles are sleeved with an airtight HDPE sleeve to reduce corrosion.

Once the piles are installed they are connected to the pontoon with pile brackets.  These specially designed brackets are rolled in a strong circular design that allows rollers or blocks to slide up the piles freely while the pontoon floats in position through different tide heights. Through the use of special hinges the pontoons can be joined together to achieve any length required.  The gangway access here is independent of the pontoon and simply sits on top and rotates according to an arc based upon the height of the tide.

SNAPSHOT:

  • Piles driven into the sea bed for ultimate stability
  • Attached to pontoon with specifically designed brackets
  • Very strong system, used for both domestic and commercial applications
  • Steel, spun concrete or cast – in – situ PVC encased piles for site specific conditions

PROUDLY A MEMBER OF:

About Marine Products Australia

Marine Products Australia (MPA) specialises in custom solutions for your boating and marine needs. Offering quality products from Australia’s leading marine manufacturers, Marine Products Australia works with you to create effective marine solutions for your boat, jet ski or houseboat.

Marine Products Australia

Ph: 1300 842 928

19 Melrich Road
Bayswater VIC 3153
Australia

Mon–Fri: 9.00am–4:30pm (AEDT)
Sat: Closed
Sun: Closed

Quick Links